Tender Notice No: Power Instruments/19-20/PU/DLSBT (2nd Camp)/3 dated.16/10/2019

Sealed quotations are invited from the Enlisted Vendors of the University to quote their lowest possible rate for the supply of the under-mentioned goods/articles, subject to the following terms and conditions. The quotations must be submitted to Dr. Chandrama Mukherjee of Department of Life Sciences of the University.

Last date & time for submission of quotation is 23.10.2019 up to 3.30 P.M.

Consignment in details:-

Sl No

Particulars

Brand/Make

Approx. Qty.

1

Genova Bio UV/Visible Scanning Spectrophotometer (#720601)

Specifications:

· Detector should have Diode array technology

· Scanning the wavelengths from 198 nm to 800 nm within 3 seconds

· Multiple measurement modes with Pre-programmed for DNA, RNA and protein analysis

· Color LCD touch screen

· Source Lamp: Xenon

· Spectral Bandwidth: 3 nm

· Wavelength Accuracy: ± 2 nm

· Wavelength Reproducibility: ± 2 nm

· Noise: ± 0.002A at 0.04A and ± 0.02A at 2.0A and 546nm

· Pathlength (mm): 10 to 100

· Absorbance range: - 0.300 to 2.500A

· Photometric Drift: ±0.005 A/h at 0.04 A and 546 nm after 60 min.

· Photometric Accuracy: ±0.01 A at 1.0 A and 546 nm

· Concentration range: ±2500

· Output- USB

· Power (VAC) : 230 to 240

· Must Include- Micro-cuvette holder, USB memory stick, and power adapter, Spectrophotometer Cuvette Holder (10x10mm square; Jenway 630-204), Macro Cuvette (3.5 mL, 10 mm path length; Jenway Quartz)

· Warranty (instrument and lamp) should be minimum three years.

Cole Parmer/ Jenway or similar

1

2

Microprocessor-based benchtop pH meter that measures pH, mV, relative mV, and temperature (# Oakton pH 700). It should feature HOLD, selectable °f or °C measurement, recall of electrode slop and offset, and electrode diagnostics. Standard buffers should be provided for calibration. Warranty should be minimum three years.

Specifications:

  • Range (pH): -2.00 to 16.00
  • Range (mV): ± 2000
  • Range (Temperature °C) : -10 to 110
  • Resolution (pH): 0.1/0.01
  • Resolution (Temperature): 0.1
  • Accuracy (Temperature): ±0.5°C
  • Accuracy (pH): ±0.01 pH
  • Temperature compensation: Automatic or manual
  • Display: LCD
  • Buffer recognition: USA, NIST
  • Calibration: Up to 6 points
  • Datalogging (points): 100
  • CE Compliance: Yes
  • Power: 230-240 VAC, 50/60 Hz

Cole Parmar or similar

1

Note: a) The sealed cover should be duly superscribed with the enquiry no & date and name of the item quoted in block letter.

b) Party is requested to keep in touch with Dr. Chandrama Mukherjee of Department of Life Sciences, Presidency University before quoting the rate for better knowledge of specification, quality of material, etc.

c) Warranty must be mentioned in your offer for all the above items.

d) Please make sure to mention unit price and cumulative price for all items that should be inclusive of all taxes, duties and other charges as stated in point no.3 below.

Finance Officer

Terms & conditions of the Quotation:-

1. The bidder must be GST-Registered (photocopy of the GST Registration Certificate to be provided along with the quotation). Quotations of the unregistered dealers would be summarily rejected.

2. The quotations should be made by the vendors in their original letterheads clearly indicating the aforesaid goods/articles in details.

3. Price quoted should be inclusive of GST, installation, commissioning and delivery charges up to Presidency University.

4. Rate and amount of GST for each item is to be specified in the quotation.

5. DSIR Certificate would be provided to the L-1 Vendor against Proforma Invoice, if necessary, for the purpose of exemption of Customs duty / GST as per the extant Rules and Notifications.

6. The above Rate Format is to be strictly followed. In case a bidder is unable to quote the rate against any item, the rate should remain blank for the respective Serial No. But in no case the row against the said Serial No. should be deleted by the Bidder.

7. Validity of the quotation will be at least 3(three) months from the closing date of the enquiry.

8. Sample must be attached with quotation in all possible cases.

9. Our enquiry no and date & Purchase order no. and date must be quoted on all correspondences and those should be duly signed and seal.

10. Bidders must as far as possible, arrange to supply the materials within the stipulated time mentioned in the purchase order. This delivery time must be strictly adhered to. Failure to supply within the specified time will lead to cancellation of the order without notice.

11. The University reserves the right to accept or reject any quotation in part or full without assigning any reason thereto.

12. In all cases of disputes, the decision of the University shall be final & binding on you.

By order

How to Find Us

Presidency University
(Main Campus)

86/1 College Street
Kolkata 700073

Presidency University
(2nd Campus)

Plot No. DG/02/02,
Premises No. 14-0358, Action Area-ID
New Town
(Near Biswa Bangla Convention Centre)
Kolkata-700156
Contact details Presidency University Students Corner

RTI